Category 05 • Axial Flux Motors

Electric Propulsion and Powertrains

Axial flux motors, SiC inverters and battery packs

High-power-density axial flux motors for electric vehicles, marine vessels and aviation, where traditional radial flux motors are bulky, heavy and less efficient. The portfolio offers a complete powertrain - motor, SiC inverter and high-density battery pack - plus electric outboards and pumps for marine and defence use.

3x
Lighter vs Radial
Flux PMSM
5-10%
Better Efficiency
than Radial Flux
15-20%
Lower Cost
vs Competitors
95%
Peak Efficiency
Traction Motor

Axial Flux Motor Portfolio

3x Lighter • 95% Peak Efficiency
14 KG WEIGHT | 6,500 RPM

35 kW Axial Flux Motor

Light commercial vehicles, hatchbacks, sports motorcycles, outboards & midget subs.

35 kW continuous power output, 55 kW peak burst power
Flexible voltage architectures: 96 V / 350 V / 650 V systems
Maximum operating speed: 6,500 rpm
Ultra-compact 14 kg total weight — revolutionary power-to-weight ratio
View Specifications
60 KG WEIGHT | 3,000 RPM

80 kW Axial Flux Motor

Commercial trucks, executive sedans, marine yachts, heavy drones & solar boats.

80 kW continuous power output, 120 kW peak power
High-voltage operation: 650 V / 800 V bus systems
Maximum operating speed: 3,000 rpm; exceptionally high continuous torque
Weight: 60 kg (versus 150+ kg for traditional radial flux motors)
View Specifications
65 KG WEIGHT | 4,200 RPM

160 kW Axial Flux Motor

Electric aircraft, eVTOLs, container vessels, and submarine propulsion.

160 kW continuous power rating
Operating bus voltage: 650 V / 800 V
Maximum operating speed: 4,200 rpm
Total motor mass: just 65 kg; unmatched aerospace and naval power density
View Specifications

Complete Powertrain (Motor + Inverter + Battery)

Up to 920 V Systems

Silicon Carbide (SiC) Inverters

Next-generation wide-bandgap SiC power electronics.

Engineered for systems operating up to 920 V DC bus
Ultra-high switching frequency with minimal thermal losses
Single or redundant controller configurations; ARINC 429, J1939, or Open CAN
Air-cooled or liquid-cooled variants for harsh environments
View Specifications

High-Density (HD) Battery Packs

Li-NMC pouch cell based high gravimetric energy modules.

Cell level energy density: 289 Wh/kg; complete pack density: 220 Wh/kg
Aerospace-grade 300 to 500 Wh/kg advanced cells available on request
Integrated automotive-grade BMS, contactors, and cell pyrotechnic fuses
Liquid or forced-air cooling manifolds with thermal runaway isolation
View Specifications

Marine & Defence Propulsion Units

Specialized naval electric outboards and dewatering pumps.

Seawater-Cooled Outboard (12 kW cont / 25 HP): 72/96V, <45 kg, lowest acoustic and thermal signature, embedded 7-inch GPS dash
Direct-Drive Pod Outboard: Immersion cooled, super silent, zero coolant clogging, <35 kg for stealth ops & coast guard
5 kW Axial Flux Dewatering Pump: 40 TPH / 666 LPM, 15 m head, 26 kg (vs 56 kg conventional), dry-run protected
View Specifications

Under Development & Next-Generation Motors

VTOL Drone Motors

35 kW (12,000 rpm, <7 kg), 240 kW and 450 kW peak classes (~16 kg) for 350 / 650 V eVTOL aircraft.

Heavy Commercial Vehicle Traction Motor

Stackable 80 / 120 kW at 650 V, 95% peak efficiency, up to 2,000 Nm torque. Compact Dia. 450 x 80 mm (vs 504 mm legacy).

Submarine-Class 5 MW Motor

5 x 1 MW stacked axial flux motor architecture with low-current SiC inverters, <0.3% torque ripple, and fully redundant coils.

COLLABORATION & TRIALS

Product Enquiries, Demonstrations & Trial Support

Contact our technical team for spec sheets, feasibility assessments, on-site demonstrations, and trial deployment.

Get In Touch Today

Whatever your requirements across defence technology, strategic advisory, or capability development, our trusted experts are ready to respond at a moment's notice.

Talk to Us